Fagor America CNC8070 - Manual (Page 214)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
9.
TOOL
AND MAGA
Z
INE TABLE
To
ol
t
abl
e
(S OFT V03.0 X )
180
9.2.2 The tool list
The tool list appears on the left panel of the tool table. The list shows the available
tools and their position. The CNC updates data of the list every time a tool change
is carried out.
Tool number
It is assigned automatically when the tool is added to the list. It may be modified by
the user in the data window.
Tool name
Name identifying the tool defined by the user in the data window. It may be edited
directly on the list.
Tool position
It indicates the position of the tool, in a magazine, in the spindle or in the claws of
the tool changer arm.
C1-C4 It is in one of the spindles.
M1-M4 It is in one of the magazines. In this case, it also indicates its
magazine position.
CH1-CH2 It is in the holders of the tool changer arm.
If none of these positions is indicated, it means that it is a ground tool. Ground tools
are not stored in the magazine and are loaded manually when requested.
How to move around on the tool list
Keys to select a tool from the list
To scroll list up and down line by line.
To move the cursor page by page through the list.
To move the cursor to the beginning or end of the list.
To access the data of the selected tool.