Fagor America CNC8070 - Manual (Page 76)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
3.
AUTOMATI
C
MODE
D
a
ta
sc
reen
(
s
of
tk
eys)
(S OFT V03.0 X )
42
3.3.2 Stop condition
To set the block where the execution of the program or subroutine will be interrupted.
After executing that block, the execution may be resumed with the [START] key or
canceled with the [RESET] key.
If the last block is not set, the program execution will end executing one of the end-
of-program functions "M02" or "M30".
Subroutine selection
To select the stop condition in a global subroutine which has been called upon from
the program. When selecting this option, the CNC shows a list of programs available
for selecting the desired subroutine.
To select a subroutine from the list.
1. Select the folder containing the subroutine.
2. Select the program containing the subroutine or write its name in the bottom
window.
3. Press [ENTER] to open the program or [ESC] to cancel the selection and close
the program listing.
The program window will show the contents of the selected subroutine.
Last block
It sets as execution interrupting block the one currently selected with the cursor. If
the last block is not set, the program execution will end executing one of the end-of-
program functions "M02" or "M30".
The last block may be selected using the cursor or the "Find text" or "Go to line" options
of the softkey menu.
The set last block remains active until canceled (with [ESC] key) or until the program
is executed; in that case, the execution will end in one of functions "M02" or "M30".
When selecting this option, the softkey menu of the CNC shows the options available
for selecting the stop condition. To return to the main menu, press the key for the
previous menu.
Keys for selecting a program
To switch windows.
To move the cursor thru the elements of the window.
To open the selected subroutine.
To cancel the selection and close the program listing.
Keys to move the cursor
Moves the cursor line by line.
To move the cursor page by page.
Moves the cursor to the first block or to the end of the program.