Fagor America CNC8070 - Manual (Page 50)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
2.
HOW
TO
OPERATE THE
CNC
O
per
at
in
g m
ode
s
(S OFT V03.0 X )
16
2.2 Operating modes
2.2.1 How to access to the operating modes
The CNC operating modes may be accessed from the keyboard or from the task
window that is displayed with the key combination [CTRL]+[A].
Each operating mode may consist of several screens or pages. Switching between
the different screens is done by pressing the access key for that operating mode.
Every time it is pressed, it displays the next screen. The screen selection is rotary
in such a way that when pressing this key on the last screen, it shows the first one.
Accessing the operating modes from the keyboard
The following operating modes may be accessed from the keyboard.
Also, the keyboard has a special key that may be configured by the machine
manufacturer to access their specific operating modes.
Automatic mode.
Jog mode.
MDI mode.
Editing - simulation mode.
User tables.
Tool and magazine table.
Utilities mode.
• Machine parameters.
• PLC.
• Diagnosis mode.
• Setup assistance.