Fagor America CNC8070 - Manual (Page 107)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
MANUAL (
J
OG)
MODE
O
per
at
io
n
s
wi
th
t
he
axe
s
4.
(S OFT V03.0 X )
73
4.2.5 Coordinate preset
Coordinates must be preset axis by axis following these steps:
2. Key in the desired preset value.
3. Press [START] to preset the entered value or [ESC] to cancel the operation.
The preset may be canceled by homing the axes one by one or by means of function
"G53".
1. Select the axis to be homed using the alphanumeric keyboard. The CNC will
highlight that axis to indicate that it is selected.
To select the numbered axes (e.g. "X1"), select any axis and then move the
selection until positioning on the desired one. The focus moves with the [
©][ª]
keys.