5 save, load and print a message and error table, Save, load and print a message and error table, 8070 cnc – Fagor America CNC8070 User Manual
Page 287
Operation manual
8070 CNC
PLC
"M
essa
ges"
ser
v
ic
e
11.
(S
OFT
V03.0
X
)
253
11.13.5 Save, load and print a message and error table
Save table
To save the table data, press the "Save" softkey and the CNC will show a list with the
files saved at the CNC.
To save the table data:
1. Select the destination folder.
2. Define the file name at the bottom window. To replace an existing file, select it from
the list.
3. Press [ENTER] to save the file or [ESC] to cancel the operation.
The file will be saved with the extension: *.MEF.
Load table
To recover the table data, press the "Load" softkey, the CNC will show a list with the
files available at the CNC.
To load the table data:
1. Select the folder where the file is.
2. Select the file or write its name at the bottom window.
3. Press [ENTER] to accept the selection or [ESC] to cancel it and close the file
listing.
Print table
It prints the message and error table out to a printer connected to the CNC or as a
file (*.PRN format) at the CNC. When printing to a file, it is saved in the folder:
"C:\Cnc8070\Users\Reports\*.prn"
When selecting this option, the CNC will show a dialog box requesting the destination
for the table (printer or file).
After selecting the destination, press [ENTER] to print the table or [ESC] to cancel it.
Print destination
To select the print destination.
To print the drawing.
To cancel the printing.