Fagor America CNC8070 - Manual (Page 356)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
15.
DI
AG
NOSI
S
G
e
ner
at
e a r
e
por
t wi
th
t
h
e
sy
st
em
i
n
fo
rm
at
io
n
(S OFT V03.0 X )
322
15.5 Generate a report with the system information
A report with all the information offered by the diagnosis mode may be obtained from
any section of the diagnosis mode. This information may be printed or saved to a file.
This produces a document with all the information about the FAGOR system installed
on a machine such as the software version, status of the remote modules, installed
drives and motors, etc.
When printing to a file, it is possible to select the name and location of the file.
To print the information, use the "Print" icon. When pressing this icon, the CNC will
show a dialog box requesting the print destination for the document (printer or file).