Fagor America CNC8070 - Manual (Page 71)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
AUTOMATI
C
MODE
Di
spl
a
yi
ng t
h
e
a
u
to
m
a
ti
c m
o
de
3.
(S OFT V03.0 X )
37
3.1.3 Channel synchronization window
The channel synchronization window is available in all work modes. This window may
be expanded using the key combination [ALT]+[S]. The synchronization is carried out
using marks in the programs. The window shows for each channel whether it is waiting
for synchronization marks or not and the status of those marks in the channel that
originates them.
The different color LED's of the window show the status of the synchronization marks
of each channel. On the left, the channels waiting for the marks and on top the
channels that originate them.
The previous graph shows for example:
• Channel 1 (CH1) is expecting synchronism marks from the rest of the channels.
The marks of channels 2 and 4 are set to ·1·. The mark of channel 3 is set to ·0·.
• Channel 2 (CH2) is not expecting any synchronism mark.
Led Meaning
White No synchronization mark expected.
Green Synchronization mark expected. The mark is set to ·1· in the channel
that originates it.
Red Synchronization mark expected. The mark is set to ·0· in the channel
that originates it.
CH1
CH2
CH3
CH4
W W W W
W W G
G
G G G
G R
R
R
R
(In the graphic, the white LED's are identified
with the letter -W-, the green ones with the letter
-G- and the red ones with the letter -R-).