Fagor America CNC8070 - Manual (Page 179)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
6.
(S OFT V03.0 X )
145
6.9.8 Display area
The softkey menu of this screen may be used to modify the zoom of the graphics area.
When accessing the "display area" menu, the softkey menu shows the following
options:
‡ Zoom +, zoom -
To enlarge or reduce the display area.
Use the arrow keys to move the drawings of the profiles. Use the "+" and "-" keys
of the keyboard to enlarge or reduce the drawings of the profiles.
‡ Optimum area
It selects the best display area, i.e. it places the profile in the center of the graphics
area and selects the best zoom possible to show the whole profile.
‡ Autozoom
When applying Autozoom, every time a new section is inserted which goes
beyond the screen, the profile will automatically be centered and zoomed in or
out to show the whole profile. This way, it will show the whole profile again.
‡ Validate
It may be used to confirm the changes made.