Fagor America CNC8070 - Manual (Page 274)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operation manual
8070 CNC
11.
PLC
"M
oni
to
ri
ng"
ser
v
ic
e
(S OFT V03.0 X )
240
11.10 "Monitoring" service
This service is used to analyze the status of the various PLC variables and resources.
When selecting the "Monitoring" option at the service window, it will show a list with
the three resource files used last. This will let you recover one of them without having
to define it again.
Pressing the "Show" softkey access the service screen. If a file was selected from
the list, it will show the resources defined in it. To close the monitoring window, press
[ESC].
Description of the monitoring service
This service screen is divided into several windows that may be accessed with the
window switching key.
The monitoring screen looks like this:
A. Resources selected for monitoring.
It shows the user resources and symbols being analyzed. They are shown
grouped in the following tables:
Each of them shows information on the status of those resources.
B. Data entry area.
It is used to define the user resources and symbols to be analyzed and modify
their values by directly assigning a value to them.
Softkey menus
When selecting this service, the horizontal softkey menu will show all the options
associated with resource monitoring. The set of options offered by this menu may be
changed using the "+" softkey which offers a new set of options.
Timers Counters
Registers Binary resources
A
B