4 customize the appearance of the logic analyzer, Customize the appearance of the logic analyzer, 8070 cnc – Fagor America CNC8070 User Manual
Page 273
Operation manual
8070 CNC
PLC
"Logi
c anal
yz
er
" ser
v
ic
e
11.
(S
OFT
V03.0
X
)
239
11.9.4 Customize the appearance of the logic analyzer
It is used to customize the looks of the different elements of the logic analyzer.
When selecting this option, the CNC shows a dialog box with the options available
for customizing.
After defining the new look, use the cursor to select one of the buttons here below
to accept or ignore the changes made and press [ENTER].
The dialog box may also be closed directly without accepting the changes by pressing
[ESC].
(A) To accept the changes and close the dialog box.
(B) To ignore the changes and close the dialog box.
(C) To apply the changes and close the dialog box.
Set aspect
To move the cursor through the elements of the list.
To show the color palette.
To select a color from the palette
Accep the selection in the color palette
It cancels the selection in the color palette.
A
C
B