Fagor America CNC8070 - Manual (Page 146)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
G
ra
phi
cs wi
n
dow
(S OFT V03.0 X )
112
6.4 Graphics window
It is used to show a graphic representation of the program being simulated and take
measurements over the drawing.
Description of the graphics window
The graphic window shows the following information:
A. Display area.
It shows a graphic representation of the tool paths or of the part as the program
is being simulated.
B. Dialog area.
It shows the position of the axes and the machining conditions active during
simulation (feedrate, spindle speed, tool and tool offset).
When selecting specific options of the softkey menu, it shows the information
associated with that option which may be defined by the user.
C. Information area.
Shows the work plane appearing in the display area and an illustration
representing the size of the graph and the portion of the graphic area selected
with the zoom.
On 3D graphics, the illustration shows the point of view of the graph displayed and
it may be changed by the operator.
D. "G" functions active during simulation.
A
B
C
D
Keys for selecting the point of view
Select a new point of view.
Assumes the new point of view selected.
Cancels the selected point point of view.