Fagor America CNC8070 - Manual (Page 150)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
G
ra
phi
cs wi
n
dow
(S OFT V03.0 X )
116
6.4.2 Simulation errors
When an error occurs, the CNC will display a window describing the cause of the error.
These errors are displayed in the middle of the screen, regardless of which window
is active.
There are two types of errors. The top of the window shows the category and it will
have a different color depending on the type of error it shows.
WARNING
They do not interrupt the simulation of the program.
The window that shows them may be removed by pressing [ESC].
ERROR
They interrupt the simulation of the program.
Although the window displaying them may be closed by pressing [ESC], it does not
mean that the error status has been taken care of; to do that, press the [RESET] icon.
The program can be neither edited nor simulated while the error stays state active.