Fagor America CNC8070 - Manual (Page 29)

CNC 8070
(S OFT V03.0 X )
XVII
MATERIAL RETURNING TERMS
When sending the Central Unit or the Remote Modules, pack them in its original package and
packaging material. If the original packaging material is not available, pack it as follows:
1. Get a cardboard box whose three inside dimensions are at least 15cm (6 inches) larger than
those of the unit. The cardboard being used to make the box must have a resistance of 170Kg
(375 lb.).
2. Attach a label indicating the owner of the unit, person to contact, type of unit and serial
number. In case of malfunction also indicate symptom and a brief description of the problem.
3. Wrap the unit in a polyethylene roll or similar material to protect it.
When sending the Central Unit, protect especially the screen.
4. Pad the unit inside the cardboard box with poly-utherane foam on all sides.
5. Seal the cardboard box with packing tape or industrial staples.