8070 cnc – Fagor America CNC8070 User Manual
Page 279
Operation manual
8070 CNC
PLC
"C
ro
s
s
re
fe
re
n
c
e
s
"
s
e
rv
ic
e
11.
(S
OFT
V03.0
X
)
245
11.11.1 Options of the "Cross reference" service (softkeys)
When accessing the "Cross reference" service, the softkey menu will offer the
following options:
Inputs
It shows information about the inputs.
Outputs
It shows information about the outputs.
Marks
It shows information about the marks.
Registers
It shows information about the registers.
Timers
It shows information about the timers.
Counters
It shows information about the counters.
It is used to print the cross reference tables out to a printer connected to the CNC
or as a "*.PRN" file at the CNC. When printing to a file, it is saved in the folder:
"C:\Cnc8070\Users\Reports\*.prn"
When selecting this option, the CNC shows a dialog box requesting the destination
for the file (printer or file). When printing to a file, it is possible to select the name and
location of the file.
After selecting the destination, press [ENTER] to print the table or [ESC] to cancel it.
Print destination
To select the print destination.
To print the drawing.
To cancel the printing.