1 appearance of the machine parameter tables, Appearance of the machine parameter tables, Cnc 8070 – Fagor America CNC8070 User Manual
Page 291
Operating manual
CNC 8070
MACHI
NE PARAMETERS
App
ear
ance of
t
he m
a
chi
ne par
am
et
er
t
a
bl
e
s
12.
(S
OFT
V03.0
X
)
257
12.1
Appearance of the machine parameter tables
When this mode is active, it will be indicated at the top right side of the general status
bar.
The available machine parameter tables are:
• General parameters.
• Axis and spindle parameters.
• Jog parameters.
• Parameters related to the "M" functions.
• Parameters for kinetics.
• Parameters for the magazines.
• HMI parameters.
• OEM parameters.
Standard configuration
The standard configuration of this work mode, described in this manual corresponds
to the one supplied by Fagor. In some cases, the manual shows a sample screen,
instead of that of the CNC in order to make it easier to understand.
This operating mode consists of several tables. The various tables may be selected
using the horizontal softkeys. If while one of the tables is selected, the previous menu
key is pressed, that table will be deselected.