Fagor America CNC8070 - Manual (Page 190)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
7.
MDI
MODE
F
u
ll M
D
I s
c
re
e
n
(S OFT V03.0 X )
156
7.3 Full MDI screen
This window shows the blocks saved so far and the edit line of the MDI mode.
It is possible to edit and execute new blocks or recover blocks saved in the block
history, which may be modified before executing them.
Description
The full MDI mode screen shows the following information:
A. History of edited blocks.
The block history shows a list of the blocks edited in MDI mode. Every time a new
block is edited, it is added to this history.
B. Edit line.
The blocks to be executed are edited on the edit line. Blocks are edited one by one.
Softkey menu
When selecting the full screen, the horizontal softkeys show the options related to
this window.
The options available in the softkeys menu are:
‡ "New block"
It positions the cursor on the edit line.
‡ "Modify"
Recovers the block selected by the cursor and it displays it on the edit line.
This option is the same as pressing [ENTER].
‡ "Delete"
It deletes the block selected by the cursor.
‡ "Cancel edit"
It cancels the editing of the block and it shows an empty edit line.
This option is only available when editing a block.
B
A