Additional remarks, Cnc 8070 – Fagor America CNC8070 User Manual
Page 31
Advertising
CNC 8070
(S
OFT
V03.0
X
)
XIX
ADDITIONAL REMARKS
Mount the CNC away from coolants, chemical products, blows, etc. which could damage it.
Before turning the unit on, verify that the ground connections have been properly made.
In order to avoid electrical shock at the Central Unit, use the proper power (mains) cable. Use
3-wire power cables (one for ground connection).
In case of a malfunction or failure, disconnect it and call the technical service. Do not get into
the inside of the unit.
Advertising