Fagor America CNC8070 - Manual (Page 57)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
HOW
TO
OPERATE THE
CNC
Fi
le
sel
e
c
ti
on wi
n
dow
2.
(S OFT V03.0 X )
23
To select a file from the list
To make searching easier, the file list may be sorted according to different criteria.
See
"Sorting the list of files" on page 23.
A file may be selected from the list:
1. Select the folder that contains the program.
2. Select the file from the list or write its name in the bottom window.
3. Press [ENTER] to accept the selection.
Pressing [ESC] cancels the operation at any time and closes the window.
How to search an element from the list
An element (folder or file) may be selected from the list by moving the cursor to the
desired element or using an alphanumeric keyboard. Pressing a key will select the
first element from the list starting with that letter or number. Pressing it again will select
the second one and so on.
The files can also be selected using the "Find file" softkey. See "File search" on page
24.
Creating a new file
To create a new file:
1. Select the destination folder for the file.
2. Write the file name at the bottom window.
3. Press [ENTER] to confirm the action.
Pressing [ESC] cancels the operation at any time and closes the window.
Sorting the list of files
The file list may be ordered alphabetically, by size or by date.
• When using a mouse, select the column header with the pointer. Every time the
same header is selected, it toggles the sorting criteria from ascending to
descending and vice versa.
• From the softkey menu. Every time the same softkey is selected, the CNC toggles
the sorting criteria from ascending to descending and vice versa.