Fagor America CNC8070 - Manual (Page 174)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
(S OFT V03.0 X )
140
6.9.5 Rectangular profile definition
X Y To define the coordinates of the profile's starting point.
Length X To define the profile's length along the abscissa axis.
Length Y To define the profile's length along the ordinate axis.
Angle To define the angle of the profile referred to the abscissa axis.
Direction To define the direction of the profile (clockwise or counterclockwise).
Validate To accept and draw the defined profile.
The data is defined in the data area of the screen where the following information is
shown:
X1, Y1 Coordinates of the profile's starting point.
XL Profile's length along the abscissa axis.
YL Profile's length along the ordinate axis.
ANGLE Angle of the profile with the abscissa axis.
DIRECTION It indicates the direction of the profile.
The softkey menu shows the necessary options for defining a rectangular profile. To
return to the main menu, press the key for the previous menu.
Clockwise arc Counterclockwise arc
X Y Coordinates of the profile's starting point.
Lx, Ly Length of the profile along both axis.
το
Angle of the profile with the abscissa axis.