Fagor America CNC8070 - Manual (Page 289)

255
CNC 8070
(S OFT V03.0 X )
12
MACHINE PARAMETERS
In order for the machine tool to be able to properly execute the programmed
instructions, the CNC must know the specific data of the machine such as feedrates,
accelerations, feedback, automatic tool change, etc.
This data is set by the machine manufacturer and must be defined in the machine
parameter table.
Selecting the machine parameter tables
What can you do in this work mode?
The machine parameter operating mode offers the following operations:
• Edit and modify the machine parameter tables.
• Validate the machine parameter tables.
• Saving the table contents.
• Recalling the table contents.
• Printing the table contents.
• Initializing the tables.
The machine parameter tables may be edited in this mode or be copied from a floppy
disk or other peripheral connected to the CNC via Ethernet.
The machine parameter tables may be accessed either using the user key if it has
been set accordingly or from the task window. The task window may be accessed
with key combination [CTRL]+[A].