Fagor America CNC8070 - Manual (Page 85)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
AUTOMATI
C
MODE
G
raphi
c sc
reen
(
s
of
tk
eys)
3.
(S OFT V03.0 X )
51
3.5.3 Dimensions
It is used to define the size of the graphic representation by setting the maximum and
minimum coordinates of the graphics on each axis.
Dimensions "Automatic"
The CNC sets the dimensions that it considers best according to the movements
programmed.
Dimensions "Edit"
It is used to manually edit the dimension values. It is edited in the graphic window
that shows the dimensions of the graphics on each axis.
When selecting this option, the softkey menu shows the options available for setting
the dimensions. To return to the main menu, press the key for the previous menu.
Keys for setting the dimensions
To move the cursor through the data.
To validate and display the set dimensions.
To cancel the set dimensions.