Fagor America CNC8070 - Manual (Page 182)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
(S OFT V03.0 X )
148
6.9.11 Profile editor. Example 1
Profile definition without rounding, chamfers or tangential entries and exits.
Definition of rounding, chamfers and tangential entries and exits
Select the "CORNERS" option and define:
Press [ESC] to quit the "CORNER" option.
End of editing
Select the "END" option and save the profile. The CNC quits the profile editor and
inserts the profile in the part-program.
Starting point X = 80 Y =-20
Straight X = 80 Y =20
Straight X = 20 Y =20
Straight X = 20 Y =80
Straight X = 60 Y =80
Counterclockwise arc X = 100 Y =80 Center X = 80 Center Y = 80 Radius = 20
Straight X = 140 Y =80
Straight X = 140 Y =20
Straight X = 80 Y =20
Straight X = 80 Y =-20
Tangential entry Select point "1" Assign radius = 5 Press [ENTER]
Chamfer Select point "2" Assign size = 10 Press [ENTER]
Rounding Select point "3" Assign radius = 10 Press [ENTER]
Rounding Select point "4" Assign radius = 5 Press [ENTER]
Rounding Select point "5" Assign radius = 5 Press [ENTER]
Rounding Select point "6" Assign radius = 10 Press [ENTER]
Chamfer Select point "7" Assign size = 10 Press [ENTER]
Tangential exit Select point "1" Assign radius = 5 Press [ENTER]