Fagor America CNC8070 - Manual (Page 184)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
(S OFT V03.0 X )
150
6.9.13 Profile editor. Example 3
Profile definition.
End of editing
Select the "END" option and save the profile. The CNC quits the profile editor and
inserts the profile in the part-program.
Starting point X = -60 Y =0
Clockwise arc Center X = -60 Center Y = 20 Radius = 20
Straight (1) Angle = 60 Tangency = Yes
The CNC shows the options for section 1. Select the correct one.
Counterclockwise
arc
(2) Radius = 15 Tangency = Yes
Straight (3) Angle = -70 Tangency = Yes
Clockwise arc Center X = -40 Center Y = 110 Radius = 25 Tangency = Yes
The CNC shows the options for section 3. Select the correct one.
The CNC shows the options for section 2. Select the correct one.
Counterclockwise
arc
(4) Radius = 15 Tangency = Yes
Straight Y =130 Angle = 0 Tangency = Yes
The CNC shows the options for section 4. Select the correct one.
Clockwise arc (5) Center X = 50 Radius = 15 Tangency = Yes
The CNC shows the options for section 5. Select the correct one.
Counterclockwise
arc
(6) Radius = 40 Tangency = Yes
Straight X = 50 Angle = 270 Tangency = Yes
The CNC shows the options for section 6. Select the correct one.
Counterclockwise
arc
(7) Radius = 10 Tangency = Yes
Clockwise arc Center X = 40 Center Y = 30 Radius = 30 Tangency = Yes
The CNC shows the options for section 7. Select the correct one.
Straight (8) X = -60 Y =0 Tangency = Yes
The CNC shows the options for section 8. Select the correct one.