Fagor America CNC8070 - Manual (Page 90)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
3.
AUTOMATI
C
MODE
G
raphi
c sc
reen
(
s
of
tk
eys)
(S OFT V03.0 X )
56
Option "Print setup"
It is used to set the printing configuration.
When selecting this option, the CNC shows a dialog box where the following may be
defined:
A. The title of the graphics that will appear next to it in the print.
B. The name of the file where the graphics will be stored when printing out to a file.
After filling out the data, press [ENTER] to accept them or [ESC] to cancel them.
3.5.9 Real coordinates
It is used to draw the real tool path or the theoretical tool path. This option is only
available in line type graphics.
When selecting this option (the softkey will appear pressed), the CNC draws the
actual (real) tool path.
Print configuration
To move the cursor through the elements of the list.
To accept the configuration defined.
To cancel the defined configuration.
A
B