Fagor America CNC8070 - Manual (Page 230)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
9.
TOOL
AND MAGA
Z
INE TABLE
M
agazi
n
e
t
abl
e
(S OFT V03.0 X )
196
9.6.2 List of magazine positions
The list of magazine positions appears on the left panel of the tool magazine table.
For each position, it indicates whether it is free, disabled or has a tool. For each tool,
it shows the remaining life time (when using tool life monitoring) and the family it
belongs to.
Magazine position
The status of a position is indicated with a symbol next to the position number.
• The position is free (white filled circle).
• The position is semi-free (black-and-white filled circle).
• The position is occupied (black filled circle).
• The position is disabled (red filled circle).
Tool number
Number of the tool occupying the magazine position.
Remaining life
If the tool life monitoring is active, shows the remaining life, either in machining time
or in the number of operations to be carried out or the tool status (rejected or worn out).
Tool family
Family the tool belongs to, defined by the user in the tool table.