Fagor America CNC8070 - Manual (Page 130)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Appear
ance
of
t
h
e
edi
ti
n
g
-
s
im
u
la
ti
on
(S OFT V03.0 X )
96
Time estimates
(This icon is only available when the statistics window is displayed).
It offers an estimate of the total execution time at 100% of the programmed feedrate.
For this time estimate, the CNC analyzes:
• The machining and positioning time for each tool used in the program.
• The number of "M" functions that are executed.
• The number of tool changes performed.
The result will appear at the statistics window.
Simulation setup
It shows the simulation setup options.
• Activate and cancel tool radius compensation.
• Conditional stop.
• Activate and deactivate the software travel limits.
• Block skip condition.
• Cancel the channel synchronization in the simulation.