Fagor America CNC8070 - Manual (Page 353)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
DI
AG
NOSI
S
Con
fi
gur
at
io
n
di
agn
osi
s
15.
(S OFT V03.0 X )
319
15.2.3 Hardware diagnosis. CAN bus and SERCOS
When selecting this element of the configuration, the diagnosis window shows the
software identification of the CNC's communications board (version, boot,
checksum) and the type of buses connected to it. Likewise, it monitors the different
voltage and temperature alarms.
Sercos bus configuration
• Listing of nodes and drive associated with each one of them.
For each drive, it indicates its software version, type of drive and the motor
connected to it.
Can bus configuration
• Resources connected and their status.
• Groups connected and number of nodes that make up each group (detected and
active).
Detailed information of the selected group.
• Group resources and their status.
• Information about the nodes that make up the group.
Detailed information of the selected node.
• Software version, boot and checksum of the code.
• Node status.
• Resources of each module.
The symbol next to the node indicates its status and its possible association.
Active.
Active, but in error.
Inactive.