Fagor America CNC8070 - Manual (Page 172)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
(S OFT V03.0 X )
138
6.9.3 Profile definition
With the softkey menu of this screen, it is possible to define any profile, a circular or
a rectangular one or to configure the graphics screen.
When accessing the editing menu, the softkey menu shows the following options:
‡ Profile
To edit any profile by defining the straight and curved sections that make it up.
See
"6.9.6 Defining any profile" on page 141.
‡ Circle
For quickly defining a circular profile. See "6.9.4 Circular profile definition" on
page 139.
‡ Rectangle
For quickly defining a rectangular profile. See "6.9.5 Rectangular profile
definition" on page 140.
‡ Expanding a profile
For adding a straight line or an arc in any position of a previously edited profile.
‡ Import profile
For importing a previously saved profile.
These profiles may also be imported in DXF format besides in ISO format.
‡ Undo
To "undo" the last operation made.
‡ Save and continue
To save the profile and continue editing. Using this key does not require that the
profile be completed.