Fagor America CNC8070 - Manual (Page 248)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
10.
UTI
L
IT
IES MODE
U
ti
lit
ie
s (
S
of
tk
eys)
(S OFT V03.0 X )
214
Machine parameters for kinetics
It is requested when trying to carry out the following actions in the machine parameter
tables for the kinematics: If not set, it will apply the password used in the rest of the
machine parameters.
• Modifying the value of a parameter.
• Initialize a table.
• Loading a table.
How to set the protection passwords
Press the "Passwords" softkey to access the password setting screen. From this
screen, it is possible to define, modify or delete the passwords. If this screen is
protected, pressing the softkey will request the general password.
Each password may be up to 10 ASCII characters long. It is case sensitive.
The "Delete all" softkey deletes all the passwords defined.
Keys to set the password
To select the previous or next password.
It assumes the defined password.
To cancel the defined password.
It deletes the selected password.