Fagor America CNC8070 - Manual (Page 159)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
G
ra
phi
c wi
ndo
w (
s
of
tk
eys)
6.
(S OFT V03.0 X )
125
Option "Print setup"
It is used to set the printing configuration.
When selecting this option, the CNC shows a dialog box where the following may be
defined:
A. The title of the graphics that will appear next to it in the print.
B. The name of the file where the graphics will be stored when printing out to a file.
After filling out the data, press [ENTER] to accept them or [ESC] to cancel them.
6.5.9 Speed
To change the simulation speed.
Speed "Edit"
It is used to select the new simulation speed. It is selected using the graduated ruler
that indicates the active simulation speed.
Print configuration
To move the cursor through the elements of the list.
To accept the configuration defined.
To cancel the defined configuration.
A
B
When selecting this option, the softkey menu shows the options to set the simulation
speed. To return to the main menu, press the key for the previous menu.
Keys for defining the measurement
To move the ruler cursor.