Fagor America CNC8070 - Manual (Page 173)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
6.
(S OFT V03.0 X )
139
6.9.4 Circular profile definition
X Y To define the coordinates of the profile's starting point.
Xcenter To define the profile's center coordinate along the abscissa axis.
Ycenter To define the profile's center coordinate along the ordinate axis.
Radius To define the profile radius.
Direction To define the direction of the profile (clockwise or counterclockwise).
Validate To accept and draw the defined profile.
The data is defined in the data area of the screen where the following information is
shown:
X1, Y1 Coordinates of the profile's starting point.
XC Profile's center coordinate along the abscissa axis.
YC Profile's center coordinate along the ordinate axis.
RADIUS Radius of the arc.
DIRECTION It indicates the direction of the profile.
The softkey menu shows the necessary options for defining a circular profile. To return
to the main menu, press the key for the previous menu.
Clockwise arc Counterclockwise arc
X Y Coordinates of the profile's starting point.
Xc, Yc Profile’s center coordinates.
R Radius of the profile.