Fagor America CNC8070 - Manual (Page 234)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operating manual
CNC 8070
9.
TOOL
AND MAGA
Z
INE TABLE
O
per
at
ions
wi
th
t
he
m
agazi
n
e
t
abl
e
(S OFT V03.0 X )
200
Magazine management using the positions list.
This type of management is only valid for loading tools manually. It lets update the
list of positions after having placed the tools directly in the magazine, without using
the CNC.
1. Select a magazine position from the list and enter the number of the tool it
occupies it.
2. Press [ENTER] to update the positions list.
Unloading a tool
Magazine management using the "Unload tool" softkey.
This type of management is valid for unloading tools both automatically and manually.
After pressing the softkey, the user is asked what kind of loading to do.
1. Press the softkey associated with tool unloading.
2. Enter the number of the tool to be unloaded.
3. Press the [CYCLE START] key to unload the tool automatically to the spindle or
the [ENTER] key to update the positions list after unloading manually.
Magazine management using the positions list.
This type of management is only valid for unloading tools manually. It lets update the
list of positions after having removed the tools directly from the magazine, without
using the CNC.
1. Select a magazine position from the list and delete the number of the tool it
occupies it.
2. Press [ENTER] to update the positions list.
The tool is unloaded into the magazine using the vertical softkey menu. After
unloading a tool from the magazine, it becomes a ground tool.