Fagor America CNC8070 - Manual (Page 260)

‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ ‡ Operation manual
8070 CNC
11.
PLC
Pr
ogr
a
m
edi
ti
ng
(
s
of
tk
eys)
(S OFT V03.0 X )
226
11.4.3 Undo
To "undo" the last modifications made. The modifications are undone one by one
starting from the most recent one.
11.4.4 Operations with blocks
It is used to copy, cut and paste the information of a block or set of blocks and export
this information as an independent program.
This option is only available when there is a text selected in the program or on the
clipboard. To select a text in the program, keep the [SHIFT] key pressed while moving
the cursor.
Operations with blocks "Copy"
It copies the selected text onto the clipboard.
Operations with blocks "Cut"
Copies the selected text onto the clipboard and deletes it from the program.
Operations with blocks "Paste"
Pastes the contents of the clipboard into the program.
Operations with blocks "Copy to program"
Saves the selected texts as an independent program.
When selecting this option, the CNC shows a list of the available programs. To save
the text as a program:
1. Select the destination folder.
2. Define the file name at the bottom window. To replace an existing file, select it from
the list.
3. Press [ENTER] to save the program or [ESC] to cancel the selection and close
the program listing.
When selecting this option, the softkey menu shows the available options. To return
to the main menu, press the key for the previous menu.