4 tool selection and tool change, Tool selection and tool change, Cnc 8070 – Fagor America CNC8070 User Manual
Page 109
Advertising
Operating manual
CNC 8070
MANUAL (
J
OG)
MODE
Tool
sel
e
ct
io
n
a
nd t
ool
chan
ge
4.
(S
OFT
V03.0
X
)
75
4.4
Tool selection and tool change
The tool located in the spindle may be changed in manual mode. Proceed as follows.
1. Press [T] at the alphanumeric keyboard. The CNC will highlight the current tool
indicating that it is selected.
2. Key in the number of the tool to be placed in the spindle.
3. Press [START] to execute the tool change or [ESC] to cancel the operation.
Advertising