Cnc 8070 – Fagor America CNC8070 User Manual
Page 176
Operating manual
CNC 8070
6.
EDI
T
IN
G-
SI
MULATI
ON MODE
Pr
of
ile
edi
to
r
(S
OFT
V03.0
X
)
142
Definition of a curved section (clockwise or counterclockwise)
To define a curved section, the softkey menu shows the necessary options to define
the data for the section.
X Y
To define the section's end point.
Center X
To define the arc's center coordinate along the abscissa axis.
Center Y
To define the arc's center coordinate along the ordinate axis.
Radius
To define the arc radius.
Tangency
To define whether the section is tangent to the previous path.
Validate
To accept and draw the defined section.
The data is defined in the data area of the screen where the following information is
shown:
X1, Y1
Coordinates of the section's starting point. They cannot be modified because they
belong to the endpoint of the previous section.
X2, Y2
Coordinates of the section's endpoint.
Xc
Coordinates of the section's center along the abscissa axis.
Yc
Coordinates of the section's center along the ordinate axis.
RADIUS
Radius of the arc.
TANGENCY
It indicates whether or not the section is tangent to the previous path.