Apple Motion 5.1.1 User Manual
Page 574
Chapter 15
Replicator
574
•
Spiral: Elements are positioned in a spiral pattern. The Spiral shape displays additional Radius,
Twists, Number of Arms, Points Per Arm, and Offset parameters in the Replicator Inspector.
•
Wave: Elements are positioned on a waveform. The Wave shape displays additional Start
and End Point, Amplitude, Frequency, Phase, Damping, Points, and Offset parameters in the
Replicator Inspector.
•
Geometry: Elements are positioned along the edge of a shape, defined by a spline object
used as the shape source. The Geometry shape displays additional Shape Source, Points, and
Offset parameters in the Replicator Inspector.
Cells along the edge of the object defined
in the Shape Source image well
Object used as the Shape Source
For information on using geometry (a shape) as a replicator shape, see
on page 583.
•
Image: Elements appear within an area defined by an image or along its border, depending
on what is chosen from the Arrangement pop-up menu. The image may have an alpha
channel. If so, the shape of the alpha channel can also be used to define the pattern. When
Image is selected, the Arrangement parameter becomes available. Depending on the
selected Arrangement, the Image shape displays additional parameters.
For information on using an image as a replicator shape, see
on page 593.
67% resize factor