Underwater – Apple Motion 5.1.1 User Manual
Page 797
![background image](/manuals/548460/797/background.png)
Chapter 19
Filters
797
This filter causes rasterization in 3D groups. For more information on rasterization, see
on page 1045.
Original image
Twirl filter applied
Parameters in the Inspector
•
Amount: Sets the radius of the twirl. Larger values affect more of the image. Values range from
0 (none of the image is affected) to 1.00 (largest amount of the image is affected). Drag the
outer circle of the onscreen controls to adjust the amount in the Canvas.
•
Twirl: Sets the amount of twist. Drag the handle of the onscreen control to adjust the Twirl
value in the Canvas.
•
Center: Sets the position of the center of the twirl. Drag the Center onscreen control to adjust
its value in the Canvas.
•
Crop: Sets whether the object is cropped at its original boundaries.
•
Mix: Sets the percentage of the original image to be blended with the twirled image.
•
Publish OSC: Publishes the filter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see
Final Cut Pro X templates overview
on page 385.
Underwater
Applies an animated distortion to an image, simulating a view through water. This filter causes
rasterization in 3D groups. For more information on rasterization, see
on
page 1045.
Original image
Underwater filter applied
Parameters in the Inspector
•
Size: Sets the size of the ripples in the water. The smaller the number, the more ripples there
are in the water simulation.
•
Speed: Sets the speed at which the distortion is animated.
•
Refraction: Sets the amount that the image is distorted.
67% resize factor