Apple Motion 5.1.1 - Manual (Page 784)

Chapter 19 Filters 784
This filter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image Droplet filter applied
Parameters in the Inspector
•
Center: Sets the position of the center of the droplet effect. Drag the Center onscreen control
to adjust its value in the Canvas.
•
Radius: Sets the radius of the droplet effect. Drag the inner circle of the onscreen controls to
adjust the Radius value in the Canvas. Drag between the inner and outer circles to adjust the
Radius and Thickness parameters simultaneously.
•
Thickness: Sets the width of the rippling waves from the droplet. Drag the outer circle of the
onscreen controls to adjust the Thickness value in the Canvas. Drag between the inner and
outer circles to adjust the Thickness and Radius parameters simultaneously.
•
Height: Sets the height of the droplet ripples.
•
Crop: Sets whether the object is cropped at its original boundaries.
•
Mix: Sets the percentage of the original image to be blended with the distorted image.
•
Publish OSC: Publishes the filter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see
Final Cut Pro X templates overview on page 385.
Earthquake
Creates an animated displacement effect on an object, adjusting its position as if shaken by an
earthquake. This filter causes rasterization in 3D groups. For more information on rasterization,
see
Groups and rasterization on page 1045.
Original image Earthquake filter applied (using three layers)
Parameters in the Inspector
•
Twist: Sets the amount the object is rotated as it is displaced.
•
Horizontal Shake: Sets the maximum amount the image is displaced horizontally.
•
Vertical Shake: Sets the maximum amount the image is displaced vertically.
67% resize factor