Apple Motion 5.1.1 - Manual (Page 814)

Chapter 19 Filters 814
•
Mix: Sets the percentage of the original image to be blended with the filtered image.
•
Publish OSC: Publishes the filter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see
Final Cut Pro X templates overview on page 385.
MinMax
Softly patterns an image by choosing a maximum or minimum color value for pixels in the
specified radius. The result erodes or dilates the light or dark areas of your object into soft,
blocky regions.
This filter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image MinMax filter applied (dark areas dilated)
Parameters in the Inspector
•
Mode: Sets the mode of the effect. The following modes are available: Minimum and Maximum.
•
Radius: Sets the radius of the effect.
•
Mix: Sets the percentage of the original image to be blended with the filtered image.
Noise Dissolve
The Noise Dissolve filter dissolves an object by adding a pattern of noise to it. Raising the value
of the Dissolve Amount parameter gradually eats away at more and more of the image. The
alpha channel is set to zero within the noisy areas, so background images are revealed as the
Dissolve Amount increases.
Original image Noise Dissolve filter applied
(Dissolve Amount = 50%)
Parameters in the Inspector
•
Dissolve Amount: Sets the percentage of pixels dissolved by noise.
•
Random Seed: Sets a number to be used as a seed for noise placement.
•
Mix: Sets the percentage of the original image to be blended with the filtered image.
67% resize factor