Apple Motion 5.1.1 - Manual (Page 808)

Chapter 19 Filters 808
Parameters in the Inspector
•
Direction: Sets the angle of direction of the offset emboss.
•
Relief: Sets the amount of the offset.
•
Crop: Sets whether the image is cropped beyond its original borders.
•
Mix: Sets the percentage of the original image to be blended with the filtered image.
Crystallize
Simulates the effect of viewing an image through a pane of glass with irregular facets
patterned into it. These mosaic-like facets give an image a crystallized appearance. This filter is
automatically animated, and the facets appear to shift and turn according to the value in the
Speed parameter. To prevent the facets from moving, set the Speed to 0 (zero).
This filter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image Crystallize filter applied
Parameters in the Inspector
•
Size: Sets the size of the facets.
•
Speed: Sets the speed of the animation of the facets.
•
Smooth: Sets whether facet colors are based on average values in the area they are replacing,
or single samples taken from the center of the facet.
•
Feathering: Sets the amount of feathering applied to the edges of facets.
•
Mix: Sets the percentage of the original image to be blended with the filtered image.
Edges
Creates an edge-detection effect by examining the luminance of an image to render high
contrast borders between regions of brightness. These edges are then traced, and all other detail
is replaced by black. The amount of eliminated detail depends on the value of the Intensity
parameter. The colors of the resulting highlights are intensified variants of the colors from the
original image.
67% resize factor