Apple Motion 5.1.1 - Manual (Page 824)

Chapter 19 Filters 824
•
Feathering: Sets the amount of feathering applied to the edges of each tile.
•
Seed: Sets a number to be used as a seed for tile placement and stacking.
•
Mix: Sets the percentage of the original image to be blended with the filtered image.
•
Publish OSC: Publishes the filter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see
Final Cut Pro X templates overview on page 385.
Tile
Tiles an image. The number of tiles depends on the value of the Scale parameter.
This filter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image Tile filter applied
Parameters in the Inspector
•
Center: Sets the position of the origin of the tiles. Drag the Center onscreen control to adjust
its value in the Canvas.
•
Skew: Sets the amount of skew applied to tiles.
•
Scale: Sets how much tiles are scaled.
•
Stretch: Sets the amount tiles are stretched vertically.
•
Angle: Sets the angle of rotation of tiles.
•
Mix: Sets the percentage of the original image to be blended with the filtered image.
•
Publish OSC: Publishes the filter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see
Final Cut Pro X templates overview on page 385.
Triangle Tile
Tiles an image with triangular shaped panels. The effect is similar to a kaleidoscope filter. This
filter is not automatically animated, but by animating the Angle parameter you can simulate the
effect of twisting the kaleidoscope to rotate the image pattern.
67% resize factor