Apple Motion 5.1.1 - Manual (Page 795)

Chapter 19 Filters 795
•
Publish OSC: Publishes the filter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see
Final Cut Pro X templates overview on page 385.
Starburst
Radiates solid-colored rays out from the center of your object. The colors are derived from pixel
values around the selected center point, with the number of colors used determined by the
Radius parameter.
This filter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image Starburst filter applied
Parameters in the Inspector
•
Center: Sets the position of the center of the starburst. Drag the Center onscreen control to
adjust its value in the Canvas.
•
Radius: Sets the radius of pixel sampling for ray color determination.
•
Mix: Sets the percentage at which the original image is blended with the distorted image.
•
Publish OSC: Publishes the filter’s onscreen controls in Final Cut Pro X. For more information on
creating content for use in Final Cut Pro, see
Final Cut Pro X templates overview on page 385.
Stripes
Turns an image into a series of vertical stripes. The angle of generated stripes can be changed
using the Angle parameter. The stripe colors are derived from pixel values along a line through
the center point at the angle specified by the Angle parameter. The distribution of colors is
determined by the Offset parameter.
This filter causes rasterization in 3D groups. For more information on rasterization, see Groups
and rasterization on page 1045.
Original image Stripes filter applied
67% resize factor