Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 124)

124 Publication 1753-UM001C-EN-P - March 2010
Chapter 14 Use the Control Panel to Monitor Status
Resource State Tab
This field Displays
CPU State The current state of the controller.
Possible states are Init, Run, Stop/Valid_Configuration, Stop/Invalid_Configuration, and
Failure_Stop. See
Controller Modes on page 113 .
COM State State of the communication portion of the controller.
Possible states are Run, Stop, and OS_Loading.
Program Name The routine name.
The name assigned by the user to the routine. The default name is ‘Routine.’
Program State The current state of the routine.
Possible states are Run, Stop, Freeze, and Failure_Stop. See Routine Modes on page 120 .
Faulty I/O Modules The number of faulty I/O modules, when the controller is in Run.
Force State The force status.
0 – forcing is disabled
1 – ready for forcing (the controller is in stop but is set for forcing)
2 – forcing is active
Remaining Force Time [s] The remaining force time in seconds.