Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 253)

Publication 1753-UM001C-EN-P - March 2010 253
Use the GuardPLC Controller as a Scanner Chapter 20
5. In the Configure Drivers dialog box, leave Browse Local Subnet
checked and click OK.
TIP
The controllers will be recognized automatically if
they are in the same subnet. If the controller type or
name is unidentified, you must install the correct EDS
file.
EDS files are available on the RSLogix Guard PLUS!
software CD or at
http://support.rockwellautomation.com .