Rockwell Automation 1755-OF8 GuardPLC Controller Systems User Manual
Page 238
Advertising
238
Publication 1753-UM001C-EN-P - March 2010
Chapter 19 Use GuardPLC Controller as an Adapter
3. Enter a name for the processor and choose the EtherNet/IP
driver as shown below.
4. If your controller is a PLC-5 controller, configure the controller.
a. Expand the Project in the project tree, right-click Controller,
and choose Properties.
PLC-5 Controller
SLC 5/05 Controller
Advertising
This manual is related to the following products: