Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 17)

17 Publication 1753-UM001C-EN-P - March 2010 17
Preface
Who Should Use This
Manual Use this manual if you are responsible for designing, installing,
programming, or troubleshooting control systems that use GuardPLC
controllers.
Personnel responsible for installation, programming, operation, and
troubleshooting of safety-related controllers must be familiar with
relevant safety standards for programmable electronic systems (PES).
Purpose of This Manual The manual only briefly describes the safety concept of the GuardPLC
family of controllers. Its purpose is to provide information on
installing and operating your controller system.
For detailed information on the safety policy regarding GuardPLC
controllers, including information on the controller’s central functions,
input and output channels, operating system, application program
safety and regulations for use, refer to the GuardPLC Controller
Systems Safety Reference Manual, publication
1753-RM002 .
For procedural information on programming and configuring
GuardPLC Controller Systems with RSLogix Guard PLUS! programming
software, refer to Using RSLogix Guard PLUS! Software with GuardPLC
Controllers, publication
1753-PM001 .
Additional Resources The table on the following page lists documents that contain
additional information concerning Rockwell Automation GuardPLC
products.
You can view or download publications at
http://www.rockwellautomation.com/literature . To order paper copies
of technical documentation, contact your local Rockwell Automation
distributor or sales representative.