Remove the connection configuration – Rockwell Automation 1755-OF8 GuardPLC Controller Systems User Manual
Page 263
Advertising
![background image](/manuals/579232/263/background.png)
Publication 1753-UM001C-EN-P - March 2010
263
Use the GuardPLC Controller as a Scanner Chapter 20
Remove the Connection
Configuration
You can also remove a connection configuration from a project.
1. Click the RSNetWorx Configuration under the EtherNet/IP
Scanner branch and press the Delete key.
RSLogix Guard PLUS! software removes the RSNetWorx
Configuration branch.
2. Right-click the controller Resource and choose Code Generation
to save the change to the project.
Advertising
This manual is related to the following products: