Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 132)

132 Publication 1753-UM001C-EN-P - March 2010
Chapter 14 Use the Control Panel to Monitor Status
Use the Multi Control Panel The Multi Control Panel lets you connect the programming terminal to
more than one controller in the project in one window and to perform
actions such as downloads, controller starts, invoking the force editor,
and so forth simultaneously.
1. Open the Multi Control Panel by choosing Online>Multi Control
Panel.
When the Multi Control Panel is opened for the first time, it does
not contain any controllers.
2. Add a controller to the Multi Control Panel by dragging and
dropping the Resource from the project tree into the Multi
Control Panel.
After a controller has been dropped in the Multi Control Panel,
the Login dialog box opens.
3. Type the correct Username and Password to connect the
controller to the programming terminal.
You must have Read/Write or Administrator rights (Access type)
to download a routine into the controller.
4. Add as many controllers to the Multi Control Panel as you need.
5. Sort the list of controllers in the Multi Control Panel by clicking
on the column headlines.