Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 246)

246 Publication 1753-UM001C-EN-P - March 2010
Chapter 19 Use GuardPLC Controller as an Adapter
4. Enter the GuardPLC controller’s Node Name and it’s EtherNet/IP
address.
5. Leave the Path field blank.
6. Click OK.
Configure a Write Operation
The example below configures the PanelView Standard terminal to
perform a write operation to set the preset value of a tag located in
the GuardPLC controller’s target output assembly (OUT_120).
1. From the Objects menu, choose Numeric Entry > Cursor Point.
2. Position the pointer (+) on the application screen, hold down
the left mouse button and drag to draw the object on the screen.
The object is created with six ####### characters as a
placeholder for the numeric value. Each # character is a single
digit.
3. Double-click the object to open the Properties dialog box.
4. Check the Touch Cell checkbox.
5. Enter a name for the Write Tag.
6. Click the Edit Tag button to open the Tag Form dialog box.