Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 130)

130 Publication 1753-UM001C-EN-P - March 2010
Chapter 14 Use the Control Panel to Monitor Status
HSP Protocol Tab
Click Reset Statistics to reset the statistics counters.
This field Displays
Name The Name of the controller
Controller Id The SRS of the controller
Controller Receive Timeout The time limit, within which a message from the scanner must be answered
Controller Resend Timeout The length of time the controller waits for an acknowledgement of a message before it resend the
message
Scanner Id
HSP Signature A unique number that ensures that the controller’s configuration data matches the scanner’s configuration
data
Scanner Receive Timeout The time limit, within which the scanner must receive a message from the controller
Connection State The state of the connection.
•
0 = closed.
•
1 = try open. The active endpoint is attempting to open the connection.
•
2 = connected. The connection is established. Normal data transfer, time monitoring, and other
functions are occurring.
Frame No. The number of the last frame sent
Reconnections The number of connections since the last statistics reset
Bad Messages The number of discarded messages since the last statistics reset
Resends The number of repeated messages since the last statistics reset
Last Scanner Response Time The last scanner response time
Average Scanner Response
Time The average scanner response time since the last statistics reset
Minimum Scanner Response
Time The smallest scanner response time since the last statistics reset
Maximum Scanner
Response Time The greatest scanner response time since the last statistics reset